Hot on the heels of their Fluid VLT, Norco have mixed their long travel Range in with a motor and a battery to produce the Range VLT full power ebike.
Featuring the high-pivot VPSHP platform of the unpowered Range, Norco’s Range VLT comes with a 750Wh battery and a Bosch CX Line motor for a bike that will likely go anywhere you point it.
Key features:
- RockShox Zeb Select 180mm fork
- RockShox Vivid Base shock
- SRAM NX Eagle 12-speed drive
- Bosch Performance Line CX motor
- Bosch PowerTube 750Wh battery
- SRAM DB8 brakes
- WTB HTZ Trail rims on Bear Pawls BMB hubs
- TranzX YS134 Dropper
- £6,999.00 RRP
- Norco.com
Off the back of their Fluid VLT launch, Norco have launched the full power, Mullet-wheeled, high pivot Range VLT. 180mm front travel is paired to 170mm out back with a Bosch CX Line motor putting out 90Nm torque and fed by a 750Wh battery.
The Range VLT sports the same VPSHP suspension layout as the unpowered version but tweaked for ebike use. The VPSHP system increases rearward axle path travel whilst the anti-squat has been tuned for efficiency and responsiveness under power. The idler mounted to the chainstay is aimed at managing chain growth and pedal-kickback.
Whilst the Range VLT range is three bikes strong, with two carbon fibre and one alloy bike on offer, only the alloy Range VLT A1 will be available in the UK at £6,999.00.
Geometry
The Norco Range VLT is available in sizes 1 to 5.
Reach on the 3 is 467.5mm with a seat tube of 415mm. Head angle is 63 degrees with an effective seat tube angle of 77 degrees. Chainstays are 436mm with a wheelbase of 1269mm.
