Hope Launch Carbon EVO Cranks and New Press Fit 41 Bottom Bracket.

Hope have added yet more products to their UK-made line up with carbon fibre EVO cranks, PF41 30mm bottom brackets and TR stems.

Hope flex their UK-made carbon fibre muscles by adding EVO cranks to the list. A new PF41 30mm bottom bracket completes the set. TR stems replace the AM stem and bronze is now available as a colour across the range.

Hope EVO Carbon Crank

Hope’s Carbon Fibre EVO cranks are hand-made in Barnoldswick from T700 fibres and feature a foam core with a small alloy insert. The outer is 1K carbon wrap for abrasion resistance and to match the other Hope carbon offerings. You get 30mm alloy axles and direct mount chainrings only. Available in 155, 165 and 170mm arm lengths.

Key features:

  • Tuned stiffness characteristics for optimum ride feel 
  • 1K outer fabric has greater abrasion resistance and gives the unique ‘Hope’ carbon aesthetic 
  • Replaceable pedal thread inserts
  • Foam core helps to absorb impacts and dampen vibrations 
  • T700 fibres for optimum strength to weight 
  • Unique carbon construction method 
  • Proven self-extracting axle/arm interface from our EVO cranks  
  • 155, 165 & 170mm length 
  • 30mm oversize 7075 aluminium alloy axle 
  • Configurable for 52 and 55mm chainlines
  • Weight from: 156mm 422g w/o chainring, 487g with 32t chainring 
  • Direct mount chainring only, Spiderless Retainer chainrings 28T to 36T 
  • Q‐Factor 168mm Boost/176mm 55mm 
  • Recommended use Trail/All mountain
  • £550.00 RRP

Hope PF41 30mm Bottom Bracket

Hope have updated their PF41 bottom bracket to improve sealing and increase longevity. Swiss manufactured bearings allow a full bottom bracket assembly with fully sealed internal centre tube and external bearing shields.

Key features:

  • Press Fit bottom bracket for 41mm diameter bottom bracket shells and 30mm cranks
  • High quality, custom designed, Swiss made stainless bearings
  • Fully sealed internal spacer tube
  • External bearing shields
  • 86.5/89.5/92/104.5/107/121mm shell width fitment options
  • Includes convertors to suit 29mm crank axles
  • £90.00 RRP

Hope TR Stem

Designed to replace the long-standing AM stem, the TR stem is seen here in the new Bronze colourway that is now on offer. The stem is made from a single piece of 2014 T6 alloy. The two piece front plate runs the no gap clamp style, and you get opposing steerer bolts too. available in 31.8 or 35mm bar clamps and 35, 40 or 50mm lengths.

Key features:

  • Opposing steerer clamp bolts to give exceptionally rigid steering characteristics
  • 2 piece front plate design with a simple “no gap” clamping system
  • Optimum machining to give lightest weight without compromising stiffness
  • 32, 40 and 50mm lengths in Ø31.8 clamp
  • 35, 40 and 50mm lengths in Ø35 clamp
  • CNC machined from a solid billet of 2014 T6 aluminium 
  • Zero rise 
  • 56mm clamping width 
  • Stainless steel taper head screws supplied 
  • To suit Ø31.8mm and Ø35mm bars 
  • Available in: black, silver, red, blue, purple, orange and new bronze  
  • Weights 32mm reach, Ø31.8mm – 123g // 40mm reach, Ø31.8mm – 131g // 50mm reach, Ø31.8mm – 150g // 35mm reach, Ø35mm – 121g 
  • £105.00 RRP

You can check out the new Hope carbon fibre cranks, PF41 bottom bracket and TR stem over on their website here.