As Eurobike kicks off, Funn MTB have released their kids range of cockpit and pedals for the mini shredders in your life.
Funn launch their range of dedicated finishing kit for kids, with plenty of options to match colours to their bike with the same quality as the rest of the Funn MTB offering.

Nixie Stem
OK, so this one is actually for everyone. If you’re after a high value stem that doesn’t cost the Earth, then you could do a lot worse than the Nixie stem. A 3D forged 6061 body in 40 or 50mm lengths and a 31.8mm clamp ticks all the necessary boxes. How complicated does a stem need to be?
Key features:
- 3D forged 6061
- 31.8mm clamp
- 40 or 50mm lengths
- Black / Red / Grey / Blue / Orange / Green
- £39.99 RRP

Hilt Jr Grip
A scaled down version of the popular Funn Hilt grip, the Hilt Jr is specifically designed to match the Speedrun bars below with their 19mm inner diameter. Outside grip diameter is 26mm for small hands. A single inner clamp helps keep things simple too.
Key features:
- 19mm inner diameter
- 26mm outer diameter
- Single inner clamp
- 72g
- Black / Red / Grey / Pink / Blue / Olive Green / Orange / Purple / Green / Turquoise / Brown
- £10.99 RRP

Taipan S Pedal
A small pedal for small feed without cutting any corners. Like their other composite pedals, the Taipan S has a glass fibre reinforced body, a CroMo axle spinning on a DU bush and a cartridge bearing. Plenty of pins that are rounded to keep the shins in tact and the tears away.
Key features:
- Glass fiber reinforced thermoplastic body
- CrMo axle w/DU and cartridge bearing
- W95mm x L80mm x H 14mm (S)
- 4 molded pins and 6 alloy pins per side
- 325g / pair (S)
- Black / Red / Grey / Pink / Blue / Olive Green / Orange / Purple / Green / Turquoise / Brown
- Axle and bearing kits available (£18.95)
- Replacement pins available (£9.99)
- £39.99 RRP

Speedrun JR Handlebar
A relatively low rise handlebar that fits the Nixie stem and Hilt Jr grips. Comes complete with a 19mm diameter at both ends, one that can be trimmed to fit.
Key features:
- 6061 alloy
- 19mm end section
- 31.8mm clamp
- Black / Red / Grey / Blue / Orange / Green
- £39.99 RRP

Upturn 75mm Handlebar
Should your small person have seen Dakotah Norton on the World Cup circuit, or just need to be a bit more upright on the bike, then the new high rise bars from Funn have to take the ticket.
Key features:
- 6066 alloy
- 75mm rise
- 31.8mm clamp
- Black / Red / Grey / Blue / Orange / Green
- £65.90 RRP


